This is an ECU/PCM reflash service for series 1 RX8(2004-2008).
The service is offered with a discount when purchasing any other product on this site!
To get it, simply select the drop-down menu to "YES".
In this case, please ship your ECU to me so that I can return your remapped ECU in the same parcel alongside anything else you've ordered.
Why remap a RX8 ECU? There are a lot of reliability and longevity mods to be done inside the ECU, out of which:
-cooling fans shall be turned on sooner, keeping the engine run cooler
-increasing the oil injection rates to aid in lubricating the engine
-deleting check engine lights(DTCs) - if you remove some equipment from your car and that check engine light bothers you - as is the case with decat pipes, no rear O2 sensor, or no air pump
-cold start RPM limiter - not to rev up your engine while it is cold
-small torque gains from leaning out the AFR at high load/rpm
-accelerator pedal made more or less sensitive - to increase control
-increase the rev limiter
The procedure to remap your ECU is the following:
1)add this item in your cart and place an order
2)ship your ECU to the address you receive on email
3)fill out a short form where you tell me what exactly would like to be changed
4)I will do those changes and ship back your ECU within 1-2 days
5)you get your ECU back within a week for Europe, 10 calendar days for USA and 2 weeks for the rest of the world.
The reflashing process is 100% safe, there is no chance of damage, I do not tear apart your ECU and solder anything to it. I use the same method that I would have used if the ECU was still mounted on the car: I read/write via the OBD2 port.
This is because I use a high quality software that needs no hardware access - Mazdaedit it's called.
The stock and edited file can be sent over to you, should you want it. Note that they are encrypted and can only be opened by MazdaEdit.
If you want to see all the possibilities offered, check out this online form.
