Mazdaspeed3 gen2 MultiGauge

Description

Got a second generation Mazdaspeed3 (MPS) ? Replace the dated and not-so-useful factory multi-information display in the top-center part of the dash with a gauge screen! This multifunction display will show the following gauges:

1. coolant temperature
2. engine oil pressure and temperature(from a 2-in-1 real oil pressure/temperature sensor, included in the kit)
3. boost
4. mass air flow
5. ignition timing
6. ignition timing knock retard
7. engine load
8. air-fuel ratio
9. short and long term fuel trims
10. fuel pump pressure(HPFP)
11. VVT advance
12. battery voltage
13. digital speedometer and tachometer

These are all spread out over 4 gauge pages, which you can scroll through at any time using the steering wheel controls:

The kit is highly customizable, allowing you to select units of measurement between fahrenheit and celsius, psi or bar, AFR or lambda, miles or kilometers; change colors between white, red, automatic white/red depending on the brightness of the dashboard, or color coded gauges for easy reading at the track.

The screen’s brightness is also automatically adjusted to the rest of the dashboard !

Alarms are also available for coolant temperature raising too much(overheating), lack of oil pressure, oil temperature and overboost. The thresholds for all of these are adjustable at any time. Th screens will also flicker to draw attention.

Speaking of customization, here’s the settings menu:

Everything needed is included in the kit, and everything is plug and play:

Instructions are provided here! Click this link.